Zinc-Alumina Alloy Rotary Sputtering Target
Senxiang is an expert in producing Zinc-Alumina Alloy Rotary Sputtering Target. All Zinc-Alumina Alloy Rotary Sputtering Targets are manufactured by the procedure of the highest density and the smallest average grain size possible. The best detection methods are used for analysis, including chemical analysis, crystal phase microscope, X-ray diffraction (XRD), X-ray fluorescence (XRF), glow discharge mass spectrometry (GDMS) and inductively coupled plasma (ICP)
Send Inquiry
Product Description
Zinc-Alumina Alloy Rotary Sputtering Target is a target obtained by smelting and casting high-purity aluminum and zinc, with uniform structure and composition, high tensile strength and hardness, good damping performance, good wear resistance, low friction coefficient and low friction temperature rise. It has gradually replaced the wear-resistant parts made of bronze and aluminum alloy, such as turbine, bearing bush, sliding block, threaded sleeve, etc. in many fields. As a commonly used engineering material, aluminum and zinc have a broad market in the fields of minerals, petroleum, chemical industry and other fields because they do not produce sparks when they collide. They can be used for most structural damping equipment, such as damping bearings, oil storage and transportation shock absorbers, etc. Its microstructure is made of face-centered cubic α Phases and close-packed hexagons η Phase composition, adjusted by changing the chemical composition of the alloy α Phase sum η The proportion of phase can change the impact load resistance of aluminum and zinc.
AZO transparent electrode film is obtained from zinc-aluminum alloy rotary sputtering target through reactive sputtering, which is widely used in low-e glass, touch screen, liquid crystal display and other fields. Due to the characteristics of aluminum-zinc target, it can be made into single large-size target, which has great advantages compared with ceramic target.
Senxiang specializes in providing aluminum and zinc targets, which can be customized according to customer requirements. If you need more information, please contact us.
Product Parameter (Specification)
| Composition | 98wt% Zn + 2wt% Al |
| Purity | ≥99.9% |
| Density （g/cm³） | ≥5.73 |
|
Electrical resistivity (Ω.cm) |
-7 10x Ω-m |
| Theoretical density (g/cm3) | 6.91 |
|
Metal impurity (ppm) |
Fe≤220,Cu≤130,Sn≤130,Total≤1000 |
| Dimension (mm) |
Maximal OD 162 Maximal Length 4000 |
Product Feature And Application
Zinc-Alumina Alloy Rotary Sputtering Target is widely used in low-e glass, touch screen, liquid crystal display and other fields
Product Details
Our Zinc-Alumina Alloy Rotary Sputtering Target is clearly tagged and labeled externally to ensure efficient identification and quality control. Great care is taken to avoid any damage which might be caused during storage or transportation.
