Senxiang Molybdenum Rotary Sputtering Target is a high-purity molybdenum raw material used for sputtering and depositing thin films.. It has excellent conductivity and thermal conductivity, small thermal expansion coefficient and strong corrosion resistance.
Molybdenum is a silvery white metal with atomic radius of 0.14nm, atomic volume of 235.5px/mol and coordination number of 8. The crystal belongs to AZ type body centered cubic system with space group Oh (lm3m). The lattice parameters of molybdenum vary from 0.31467 to 0.31475nm at room temperature. The density of molybdenum is 10.23g/cm, the thermal expansion coefficient of molybdenum is 4.9 × 10 / ℃ at 20 ~ 100 ℃, and the thermal conductivity of molybdenum is 142.35w / (m · K). The resistivity of molybdenum is 5.17 × - 10 Ω· cm at 0 ℃, 24.6 × - 10 Ω· cm at 800 ℃ and 72 × - 10 Ω· cm at 2400 ℃. Molybdenum is paramagnetic. The specific magnetization coefficient of molybdenum with 99.99% purity is 0.93 × 10cm / g at 25 ℃. The specific heat of molybdenum is 242.8 J / (kg · K) at 25 ℃. The Mohs hardness of molybdenum is 5 ~ 5.5. The evaporation heat of molybdenum at boiling point is 594 kJ / mol, melting heat is 27.6 ± 2.9 kJ / mol, and sublimation heat is 659 kJ / mol at 25 ℃.
Molybdenum Rotary Sputtering Target is a kind of high purity molybdenum raw material used for sputtering deposition films. According to the different shapes, molybdenum sputtering targets can be divided into circular, rectangular, square, annular, oval, cylindrical, planar, rotatable (rotary) molybdenum targets. It has the advantages of excellent conductivity and thermal conductivity, small thermal expansion coefficient and strong corrosion resistance .Molybdenum Rotary Sputtering Target materials are mainly used in electric vacuum devices, high temperature furnace heating body, heat insulation board, material boat, etc., and can also be used to manufacture molybdenum boat, molybdenum wafer for power semiconductor and parts of electric vacuum light source.
Composition | Mo |
Purity | ≥99.95% |
Density (g/cm³) | ≥10 |
Electrical resistivity (Ω.cm) |
|
Theoretical density (g/cm3) | 10.22 |
Metal impurity (ppm) |
Fe≤50, Ni≤50, Cu≤30, Al≤50, Si≤60, W≤100,Other≤30,Total≤100 |
Dimension (mm) |
Maximal OD 145-170 Maximal Length 4000 Maximal single segment length 1000 |
Molybdenum Rotary Sputtering Target materials are mainly used in electric vacuum devices, high temperature furnace heating body, heat insulation board, material boat, etc., and can also be used to manufacture molybdenum boat, molybdenum wafer for power semiconductor and parts of electric vacuum light source.
Our Molybdenum Rotary Sputtering Targett is clearly tagged and labeled externally to ensure efficient identification and quality control. Great care is taken to avoid any damage which might be caused during storage or transportation.