Molybdenum niobium (MoNb) is used as a special corrosion-resistant contact of ITO sensor in the touch panel. Senxiang's Molybdenum Niobium Alloy Sputtering Target meets the most stringent quality requirements. From specially pure metal powder to finished target, we concentrate the whole manufacturing process under one roof. Our Molybdenum Niobium Alloy Sputtering Target can be used as flat targets and rotating targets of all common sizes.
Molybdenum Niobium Alloy Sputtering Target is gray and square, with purity of 99.95%. It is prepared by powder process and generally contains about 5-10% niobium. Molybdenum Niobium Alloy Sputtering Target is to evenly mix molybdenum powder and niobium powder, then press and sinter the powder, and then conduct uniform densification treatment, and then process the material through surface grinding, polishing and other mechanical processing. In the touch screen group, molybdenum and niobium are mainly used for metal wiring of ITO thin film sensors with high corrosion resistance.
Composition | 90wt%Mo + 10wt%Nb |
Purity | ≥99.95% |
Density (g/cm³) | ≥9.7 |
Electrical resistivity (Ω.cm) |
|
Theoretical density (g/cm3) | 10.064 |
Metal impurity (ppm) |
Total < 500 |
Dimension (mm) |
(50-500)L×(50-200)W×(4-20)H |
Molybdenum Niobium Alloy Sputtering Target have been widely used for magnetron sputtering of flat panel displays. In the industrial application of molybdenum target, more and more research has been carried out on molybdenum alloy to further improve its corrosion resistance (discoloration) and adhesion (film stripping). Adding V, Nb, W and Ta into molybdenum can improve the specific resistance, stress and corrosion resistance of products.
Our Molybdenum Niobium Alloy Sputtering Target is clearly tagged and labeled externally to ensure efficient identification and quality control. Great care is taken to avoid any damage which might be caused during storage or transportation.